Easter Basket Magic — Uncover up to 40% OFF Coupon

How to manually flash the firmware of DVDFab Movie Server?

Occasionally, due to the network issue, you might experience some difficulty upgrading the firmware over the air (OTA). When this happens, you can also try to manually flash the firmware via a USB flash drive. However, be aware that by doing this way, your Movie Server will be reset to the factory settings, meaning you will lose all the installed apps and login information, and you will need to start all over again, from the setup process. That said, the data in the 3.5” SATA hard drive would not be affected.

 

Step 1 > Download the firmware and unzip the sdk.rar file. Copy the four files (bootargs.bin, fastboot.bin, recovery.img and update.zip) to the root directory of any FAT32 USB flash drive;

 

Download SDK here: http://download.dvdfab.cn/testing/SDK.rar

 

Step 2 > Power off the Movie Server and plug the USB flash drive into the USB port;

 

Step 3 > Press and hold the Reset button with a toothpick/needle;

 

Step 4 > Turn on the Power Switch 10 seconds before you release the Reset button, you will see Android robot showing up in the display, wait until the firmware is flashed;

 

Step 5 > Once the firmware is flashed, you can then setup the Movie Server again.

Choose Language

English